3040 Automatic Tuning Unit Whip 6M
3040 Automatic Tuning Whip Standard Package
The 3040 Automatic Tuning Whip Standard Package usually ships in 1-2 weeks from order date.
With a 125 W RF power handling capability, the 3040 can be used for voice and data operation over the full 2 to 30 MHz frequency band. The tuner has tune from memory time of less than 200 mS with unlimited memory capacity, and new frequencies aare typically tuned in less than one second.
The extremely fast tuning capability and optomised antenna efficiency ensures maximum system readiness is always available to the operator.
The 3040 is built to withstand the severe conditions that are often experienced in mobile high frequency radio deployments. The internal electronics are protected by a lightweight composite shroud and vibration absorbing mount to provide a prodict that is fully waterproof and compliant to MIL-STD-810F for temperature, immersion, vibration and dust ingress.
The control interface of the 3040 is fully integrated with CODANTM HF transceivers so that tuning is transparent to the operator. The 3040 is designed for full compatability with all modes of operation, including receiver scanning, and ALE (Automatic Link Establishment) and data.
2 to 12 MHz (3.5 m, 11.5 ft NVIS)
Power rating 125 W PEP (voice and data)
Power consumption 0.4 A typical, less than 0.8 A typical while tuning
Input Independance 50 Ω
VSWR Typically ≤1.5:1
Tuning Speed New frequency 1 sec average, memory tune <150 ms
Memory channels Unlimited
Temperature rating -30⁰C (-22⁰F) to 60⁰C (140⁰F), 95% humidity
DC operating range 11 to 15.5 V DC (12 V DC nominal)
Protection Open circuit, short circuit, over voltage, over temperature, voltage transients, high VSWR
MIL-STD 810F Temperature, Immersion, Dust, Vibration
MIL-STD-461 Designed to standard
Dimensions 147 mm W x 167 mm D x 240 mm H; 5.8" x 6.6" x 9.4" (excluding spring and whip)
Weight 3.15 kg (6.9 lbs) including spring and whip
Mounting M14 stud, 40 mm (1.6") long